GE DS200DMCBG1AED SERVO I/O | PSVOH1B

Product Introduction

The DS200DMCBG1AED is an I/O pack designed to work in conjunction with a terminal board.  It is approved for use within hazardous locations when used with specific terminal boards like the IS200EGDMH1AFF, or the IS200EGDMH1AFF   This unit has its own power supply.

Only resistive simple apparatus like RTDs should be connected to RTD inputs on the DS200DMCBG1AED.   Cabling used for these connections should have suitable insulation as specified in local electrical codes.

The  is a Resistance Temperature Device (RTD) Input Module manufactured by GE. The product specifications are as follow:

The IDs of the 21 plug-in relays are prefixed with K and end with a number. The numbers are in sequence beginning with 1. Some of the IDs are K1, K5, K10, and K21. The relays snap into place on the board and are help in place with metal straps. To remove a relay, detach the metal strap and pull the relay out of the connector. To install a relay, align it with the connector and press it into the connector. Then, clip one end of the metal strap to the connector, arrange the metal strap over the top of the relay, and clip it to the other side of the connector.