Product Introduction
Many products are not yet on the shelves please contact us for more products
.If there is any inconsistency between the product model and the picture on display, the model shall prevail. Contact us for the specific product picture, and we will arrange to take photos in the warehouse for confirmation
.We have 16 shared warehouses around the world, so please understand that it can sometimes take several hours to accurately return to you. Of course, we will respond to your concerns as soon as possible
REXROTH FCS01.1E-W0011-A-04-NNBV R911311065 Bosch Rexroth IndraDrive Fc 2.2kW 400V 3ph – AC Inverter Drive Speed Controller
R911311065 refers to a Bosch Rexroth IndraDrive Fc AC frequency inverter. It is designed for a 2.2kW (3.0HP) 400V 3 Phase motor with VxF or Sensorless Vector control to 5.5A. The device has a range of features, including two analog/digital inputs, five digital inputs, one analog output, two relay contact sets, RS232, and RS485. It has a compact design and is simple to install [plc-module.cn, 2, 4]
Bosch Rexroth IndraDrive Fc AC Frequency Inverter for 2.2kW (3.0HP) 400V 3 Phase motor in VxF or Sensorless Vector control to 5.5A. Simple to set-up with 400V three phase input for a standard AC Induction motor.
No Keypad included – see linked products below for keypad options.
Size B: 73mm Wide x 153mm Deep x 226mm high (260mm high when included wall mounting brackets are fitted) IP20.
Weight: 1.8kg (approx).
Overload – 150% x 60 seconds, 200% x 3.5 seconds
Speed Control Range – 0-400Hz.
Braking – To 130 Ohm minimum external resistor (not supplied) – See the Resistor options linked below or use the ‘Which Resistor’ button on this page.
Features – 2 x Analogue/Digital Inputs, 5 x Digital Inputs, 1 x Analogue Output, 2 x Relay Contact sets, RS232, RS485.
DC Bus terminals for Common Bus energy saving applications.
Programmable from a PC via ‘IndraWorks’ software and PC Cable – see linked products below.
Input Current – 7.7.
Input Voltage – 380-480V Three Phase -20% +10% at 50/60Hz ±5%.
EMC Filters to IEC/EN 55011 Class A 2nd Environment (Industrial)
Wall mount in clean environment or cubicle mount.
Rated at 40°C Ambient.
Ventilation space above and below – 100mm.
Ventilation space at sides – 0mm (drives can be mounted side by side)
Heat Loss at max output – [not specified].
Mounting via 2 x detachable heatsink-mounted brackets at rear (top and bottom). 1 x 5.5mm diameter hole per bracket. Full part number is FCS01.1E-W0011-A-04-NNBV or R911311065.
Inventory supply
MHD041A-144-PP0-UN
MHD041B-144-NG0-UN
MHD041B-144-NG0-UP
MHD041B-144-NG1-UN
MHD041B-144-NP0-UN
MHD041B-144-NP1-UN
MHD041B-144-PG0-UN
MHD041B-144-PG0-UP
MHD041B-144-PG1-UN
MHD041B-144-PP0-UN
MHD041B-144-PP0-UP
MHD041B-144-PP1-UN
MHD071A-061-NG0-UN
MHD071A-061-NP0-UN
MHD071A-061-PG0-UN
MHD071A-061-PP0-UN
MHD071B-035-NG0-UN
MHD071B-035-NG1-UN
MHD071B-035-NG2-UN
MHD071B-035-NG3-UN
MHD071B-035-NP0-UN
There are no reviews yet.