GE IC697CPM791-FD CPU Halt production

GE IC697CPM791-FD CPU Halt production The IC697CPM791-FD CPU PACSystems™ RX3i CPM791 can be used to perform real time control of

machines, processes, and material handling systems. The CPU communicates with the programmer via the internal Ethernet port or a serial port. It communicates with I/O and Intelligent Option modules over adual PCI/Serial backplane.

The replace a relay, it is necessary to remove the GE Simplex Trip Board IC697CPM791-FDfrom the drive. Communicate with an engineer or installer who is familiar with the installation of the drive and is experienced with the power supplies connected to the drive. Disable the power supplies by disconnecting the fuse or by other means as required. Use a testing device to test the interior of the drive for electric current, before you continue. Disconnect the cables from the board and diagram the locations of the cables so that you can connect the cables to the right connectors when you reinstall the board..