GE IS200BAIAH1BEE Controller Module Card

Product Introduction

IS200BAIAH1BEE Power Distribution Board The Realization Of The PLC Module In The CPU Master Module Is Presented Emphatically.

The IS200BAIAH1BEE is a power distribution board manufactured by General Electric (GE) [1]. It features 8 toggle switches, 36 fuses, and 4 signal wire terminals, as well as 36 OK LEDs and 1 10-pin connector. The fuses are situated in a vertical position in the canisters and are easy to access and replace when needed. The board is populated with black plastic housings for 36 fuses. To replace a fuse on the board, twist the top of the canister to open it. The top remains attached to the canister for ease of use. Use your thumb and one finger to remove the fuse from the canister. It is best practice to discard the blown fuse so that it isn’t inserted into a canister again on the board accidentally. To install a new fuse, align the fuse with the opening and drop it into the canister. Either end of the fuse can be dropped into the canister. Place the top on the canister and twist it to close it [1].

Each fuse has an LED next to it that indicates that the fuse is OK. When lit, the green LED indicates the element in the fuse is intact and working to protect the board circuit. When off, the fuse is blown or the board is not receiving power. If all the LEDs are off, you might suspect that the board is not receiving power [1].

To determine if a fuse is blown and needs replacing, a visual inspection of the fuse is not possible because the fuse is inside the canister. However, the LEDs next to each fuse indicate whether the fuse is OK or not

The GE Power Distribution Board IS200BAIAH1BEE features 8 toggle switches, 36 fuses, and 4 signal wire terminals. It also has 36 OK LEDs and 1 10-pin connector. The GE Power Distribution Board IS200BAIAH1BEE is populated with black plastic housings for 36 fuses. The fuses are situated in a vertical position in the canisters and are easy to access and replace when needed.